Solar energy meter

An instrument was developed to continually integrate the energy available in incident light on a specifically oriented surface. The unit was designed for outdoor use in remote locations and is capable of operation over a temperature range of -20 to +60 C with good accuracy. The unit is weather resistant, requires low power, has a high input impedance, is inexpensive, and has a visual readout and an analog output for recording

Cost competitiveness of a solar cell array power source for ATS-6 educational TV terminal

A cost comparison is made between a terrestrial solar cell array power system and a variety of other power sources for the ATS-6 Satellite Instructional Television Experiment (SITE) TV terminals in India. The solar array system was sized for a typical Indian location, Lahore. Based on present capital and fuel costs, the solar cell array power system is a close competitor to the least expensive alternate power system. A feasibility demonstration of a terrestrial solar cell array system powering an ATS-6 receiver terminal at Cleveland, Ohio is described

Magnetic field mapper

Magnetic field mapper locates imperfections in cadmium sulphide solar cells by detecting and displaying the variations of the normal component of the magnetic field resulting from current density variations. It can also inspect for nonuniformities in other electrically conductive materials

Specimen Preparation and Chamber for Confocal Microscopy of the Ex Vivo Eye

A chamber is described for maintaining the mechanical and physiological stability of the ex vivo eye during observation with confocal microscopy. The mechanical stability is provided by a plastic ring situated on the limbal region of the eye. The ring and supporting chamber are designed to reduce mechanical motion of the specimen. The ring and chamber size vary with the species and size of the eye under examination. The physiological stability over a period of approximately one hour is provided by immersing the eye in a bicarbonate Ringer\u27s solution that is exchanged every five minutes. This fluid exchange is made between periods of microscopic observation. The suggested method for confocal microscopic observation of cornea and ocular lens in an ex vivo eye is to use a non-contact water immersion microscopic objective with a high numerical aperture. This is a non-invasive, non-applanating system for the confocal microscopical observation of ex vivo rabbit or human eye. Sample preparation and the specimen chamber are described. Optical sections of the cornea and lens obtained with a confocal microscope from a freshly removed ex vivo rabbit eye are presented as examples of applications of this technique

Fracture characteristics of structural aerospace alloys containing deep surface flaws

Conditions controlling the growth and fracture of deep surface flaws in aerospace alloys were investigated. Static fracture tests were performed on 7075-T651 and 2219-T87 aluminum, and 6Ai-4V STA titanium . Cyclic flaw growth tests were performed on the two latter alloys, and sustain load tests were performed on the titanium alloy. Both the cyclic and the sustain load tests were performed with and without a prior proof overload cycle to investigate possible growth retardation effects. Variables included in all test series were thickness, flaw depth-to-thickness ratio, and flaw shape. Results were analyzed and compared with previously developed data to determine the limits of applicability of available modified linear elastic fracture solutions

Confocal Microscopy and Three-Dimensional Reconstruction of Thick, Transparent, Vital Tissue

The three-dimensional visualization of the 400 micron thick, transparent, in situ cornea is described to demonstrate the use of confocal light microscopy for noninvasive imaging of living cells and thick tissues in their normal, vital conditions. Specimen preparation and physiological stability, as well as light attenuation corrections are critical to data acquisition. The technique to provide mechanical stability of the specimen during the duration of the image acquisition is explained. A laser scanning confocal light microscope (LSCM) was used to obtain optical serial sections from rabbit eyes that were freshly removed and placed in a physiological Ringer\u27s solution. This study demonstrates the capability of the confocal light microscope to obtain a series of high contrast images, with a depth resolution of one micron, across the full thickness of living, transparent tissue. The problems of nonisotropic sampling and the limited eight-bit dynamic range are discussed. The three-dimensional reconstructions were obtained by computer graphics using the volume visualization projection technique. The three-dimensional visualization of the cornea in the in situ eye is presented as an example of image understanding of thick, viable biological cells and tissues. Finally, the criterion of image fidelity is explained. The techniques of confocal light microscopy with its enhanced lateral and axial resolution, improved image contrast, and volume visualization provides microscopists with new techniques for the observation of vital cells and tissues, both in vivo and in vitro

Agricultural Prices and Income Distribution among Farmers: A Whole-Household, Multi-Country, Multi-Year Analysis

Recent studies have emphasized that the poorest farmers are often net buyers of key commodities and therefore harmed by rising prices. We use LSMS data from Tanzania, Vietnam and Guatemala to test the degree of net purchases or sales by income level. We find that poorer farmers may be net buyers of individual crops, but only the poorest are net buyers of all crops. More generally, net sales among poor farmers are low. We conclude that agricultural price changes have a diverse but limited influence on poor farmers’ welfare, because their farm sales tend to be offset by food purchases.market participation, poverty, inequality, multi-continent multicountry, Agricultural Finance,

Investigation of deep flaws in thin walled tanks

Growth of deep surface flaws in thin wall tanks of aluminum and titanium base metal

Linkages between Market Participation and Productivity: Results from a Multi-Country Farm Household Sample

We build upon international trade literature to analyze the direction of causality between market participation and productivity. Cross-country household data from Tanzania, Vietnam and Guatemala are used in a 2SLS approach with market participation and productivity as endogenous variables. Results indicate that households with higher productivity tend to participate in agricultural markets regardless of market access factors. In contrast, having better market access does not necessarily lead to higher productivity. This finding suggests that investments in market access infrastructure provide minimal, if any, improvements in agricultural productivity; whereas programs targeted at enhancements in farm structure and capital have the potential to increase both productivity and market participation.International Relations/Trade, Marketing, Productivity Analysis,